Title:
Baby Cribs - Finding The Right One
Before you go looking at baby cribs you should determine your budget. A good idea is to have a price range to work with. This will allow for more choices in the long run.
The main concern you should have whether you are buying a new crib or a used one. The crib must meet government standards. When you put the crib together be sure to so following the manufacturer’s directions exactly to ensure the greatest amount of safety for your child. It should also be used properly.
Safety concerns include the mattress. The mattress must be firm and tight fitting and there should be no missing or broken hardware. There should be no missing or loose slats. The slats should not be any more than 2 3/8 inches apart - about the width of a soda can. There should be no cutouts in the foot or headboards. If there are corner posts they should be no more than a sixteenth of an inch above the foot or head bar.
Drop sides on a crib is very convenient and is probably the most used feature on any crib. Fixed sides do not have the drop down feature and is great for tall people or those who will only be occasionally using the crib.
Most parents opt for a single drop down sided crib that allows them to easily lift baby out of the crib and to place him in the crib. This is especially convenient if your crib is placed against the wall. Double drop down sided cribs are a popular option among those parents who have room to place the crib so it’s not against the wall.
There are several ways in which drop sides can be lowered. There is the knee push lever and all you have to do is lean your knee against the crib side and it will drop. This is convenient if you have your baby in your arms.
The knee push sides may be the most common type available. Another common type is the foot bar. You balance on one foot and push the bar down with the other to lower the side. There is the double trigger drop mechanism. There are levers on both ends of the crib and you need both hands free to use them. You squeeze the triggers and then the side will drop. The problem with this type is that if you have the baby in your arms it will be next to impossible to operate.
The wheels on a crib are a great asset because it makes the crib easier to move to clean under or retrieve dropped toys as well as changing bedding. Make sure the casters are strong and turn easily. If you don’t think you will need them you can put them aside in case you change your mind.
There are adjustable mattress heights available on all cribs with the exception of the cheapest models of cribs. The three position option is available and is the wisest choice. Two height position are acceptable. Single height mattress is not a safe choice because as your child grows the mattress should be lowered to prevent him from climbing out of the crib or toppling out of the crib.
You should look at the mattress supports as well. Some have vinyl straps that could wear out and break others have metal bar supports which is a better option. The best option however is a metal spring system where the entire mattress is supported and is the most durable of the three options.
Selasa, 13 Desember 2011
baby furniture
issues. If you need further information you can search the Internet and visit baby furniture stores.
The crib is where your baby will spend a lot of their time and you want to be sure they are safe. Below are some of the questions (with the answers) that are asked about crib safety. Topics such as mattress position, how to place your baby in the crib, and general safety standards are discussed, as are other issues. If you need further information you can search the Internet and visit baby furniture stores.
<b>Q. Are there safety standards for baby cribs?</b>
Yes there are some very exact standards for your baby’s crib. In 1974 it was made law that cribs should no longer be painted with lead based paint. It was discovered that the ingestion of lead (from any source) could cause learning disabilities and other difficulties in young children. The slats of the crib must be no more than 2 3/8 inches apart, this is to prevent your baby from getting his body or head stuck between the bars causing injury or strangulation. The side bar should be 26 inches above the mattress when it is in its lowest position.
The crib is where your baby will spend a lot of their time and you want to be sure they are safe. Below are some of the questions (with the answers) that are asked about crib safety. Topics such as mattress position, how to place your baby in the crib, and general safety standards are discussed, as are other issues. If you need further information you can search the Internet and visit baby furniture stores.
<b>Q. Are there safety standards for baby cribs?</b>
Yes there are some very exact standards for your baby’s crib. In 1974 it was made law that cribs should no longer be painted with lead based paint. It was discovered that the ingestion of lead (from any source) could cause learning disabilities and other difficulties in young children. The slats of the crib must be no more than 2 3/8 inches apart, this is to prevent your baby from getting his body or head stuck between the bars causing injury or strangulation. The side bar should be 26 inches above the mattress when it is in its lowest position.
prevent your baby
If your child is more than an inch taller than the sidebar it is time to move him into a regular bed.
<b>Q. Are there some hazards in my baby’s crib that I need to be aware of?</b>
Your mattress must fit snugly in the crib; an ill-fitting mattress could cause your baby to slip between the mattress and the side bar causing suffocation. The mattress height should be able to be adjusted into at least three different levels. When your baby becomes more mobile you will want to put the mattress in the lowest position to prevent your baby from climbing or falling out. The slats should be tight, loose slats could pinch little fingers. Do not put the crib near a window to prevent your baby from possibly falling out or becoming tangled in Venetian blind cords.
<b>Q. What are some historical facts about the crib?</b>
Here is a short chronological time line of crib facts:
1973 - The standard for crib slats was to be no more than 2 3/8th inches apart to prevent your baby from slipping through or getting their head stuck. Also, double latches for drop-down sidebars were to become the norm.
1976 - The standard for cutouts in the crib end panels are presented. The end panels must not have any decorative cutout designs. Children were getting their limbs or heads caught causing serious injury or death.
1978 - Cribs must now be painted with non-toxic finish.
1981 - Two models of cribs with cutouts are recalled.
1988 - A voluntary standard addresses mattress support hardware, failure of glued or bolted connections, drop-side latch failure and loosened teething rails.
<b>Q. Are there some hazards in my baby’s crib that I need to be aware of?</b>
Your mattress must fit snugly in the crib; an ill-fitting mattress could cause your baby to slip between the mattress and the side bar causing suffocation. The mattress height should be able to be adjusted into at least three different levels. When your baby becomes more mobile you will want to put the mattress in the lowest position to prevent your baby from climbing or falling out. The slats should be tight, loose slats could pinch little fingers. Do not put the crib near a window to prevent your baby from possibly falling out or becoming tangled in Venetian blind cords.
<b>Q. What are some historical facts about the crib?</b>
Here is a short chronological time line of crib facts:
1973 - The standard for crib slats was to be no more than 2 3/8th inches apart to prevent your baby from slipping through or getting their head stuck. Also, double latches for drop-down sidebars were to become the norm.
1976 - The standard for cutouts in the crib end panels are presented. The end panels must not have any decorative cutout designs. Children were getting their limbs or heads caught causing serious injury or death.
1978 - Cribs must now be painted with non-toxic finish.
1981 - Two models of cribs with cutouts are recalled.
1988 - A voluntary standard addresses mattress support hardware, failure of glued or bolted connections, drop-side latch failure and loosened teething rails.
Langganan:
Postingan (Atom)